Quick answer: The Toyota Prado LED Headlights 2010+ is listed for 2010+, but year alone does not prove compatibility. Confirm VIN, production date, market, original lamp type, connectors, modules and LHD/RHD beam pattern before ordering.
Product snapshot
| Vehicle | Listed range | Price when checked |
|---|---|---|
| Toyota Prado J150 | 2010+ | €688 sale / €788 regular |
Prices, functions and package contents can change. Confirm the current quotation and packing list before payment.
What the year range means
Early J150 vehicles can differ by market, production date, original halogen or HID equipment, leveling and bumper or grille specification.
Registration year can differ from production date on imported vehicles. Send the supplier the VIN, production month, complete front photographs, rear housing photographs and close-ups of brackets, connectors and control modules. These checks prevent a lamp that looks correct but cannot mount or communicate properly.
Compatibility checklist
- J150 or LC150 chassis and exact production date
- VIN and destination market
- Original halogen, HID/xenon or factory LED lighting
- Housing shape, mounting tabs, bumper and grille interface
- Connector pin count and original module part numbers
- LHD or RHD beam pattern
- Manual or automatic leveling
- DRL, high beam, low beam, turn signal and side-marker behavior
- Adaptive functions and dashboard monitoring
- Written list of supplied drivers, adapters and brackets
Functions to confirm
Request a written function map for DRL, low beam, high beam, turn signal, position light, side marker, welcome animation, leveling and any adaptive behavior. Sequential, matrix style and projector terms describe appearance or hardware; they do not automatically guarantee factory adaptive functions.
Price and total installed cost
The listed price was €688 sale / €788 regular. Also budget for shipping, duties, professional labor, transferred modules, adapters, coding and beam aiming. The lowest product price is not the lowest installed cost when important hardware is excluded.
Installation process
- Record original functions and scan existing fault codes.
- Compare new and original housings, tabs, plugs and modules before removing protective film.
- Temporarily connect and test both lamps before final bumper assembly.
- Verify DRL, low beam, high beam, indicators, leveling and dashboard warnings.
- Inspect seals, vents, rear covers and harness routing.
- Complete required coding or electrical adaptation.
- Aim the beams professionally.
Common problems
Check for flicker, one-sided failure, bulb warnings, abnormal indicator speed, condensation, radio interference and incorrect aim. Diagnose power, grounds, connectors, module transfer, coding and sealing before replacing parts. Do not drive at night until the beam pattern is verified.
Frequently asked questions
Will this fit my Toyota Prado J150?
Fitment depends on the exact chassis, production date, market, original headlight type, connectors, mounting points, beam pattern and electronic functions. Confirm with VIN and clear front, housing, plug and module photos before ordering.
Which year models are compatible?
The listing uses 2010+ as a screening range, not universal confirmation for every trim, facelift or market. Verify the production date and original equipment.
Is coding required?
Coding or electrical adaptation may be required when monitoring, leveling, adaptive functions, original lighting technology or control modules differ. Scan faults and test every function before final reassembly.
What modules are included?
Confirm whether the package includes a left and right pair, LED drivers, ballasts, control modules, adapters, brackets and instructions, and whether original modules must be transferred.
How difficult is installation?
Installation is intermediate to advanced. Bumper removal, connector verification, sealing checks, possible coding and professional beam aiming are recommended.
Fitment note: Final compatibility must be confirmed from the exact vehicle configuration.
