Quick answer: Tangma Craftsman lists a complete LED headlight upgrade for 2007+ Mercedes-Benz G-Class W463 applications. “2007+” should be treated as a starting fitment range, not proof that the assembly fits every later G-Class. Confirm the exact W463 generation, production date, original headlight type, connectors, modules, beam pattern and adaptive functions before ordering.
Product covered
The Mercedes G-Class W463 LED Headlights 2007+ are listed as a vehicle-specific DRL and turn-signal upgrade. The product was listed at € 688 when this guide was prepared. Current price and package contents should be reconfirmed before payment.
W463 compatibility checklist
| Check | What to verify |
|---|---|
| Chassis generation | Confirm the vehicle is the intended W463 configuration; do not rely only on the G-Class badge. |
| Production date | Provide VIN and door-jamb/build information. |
| Original headlights | Halogen, xenon, LED, auto leveling or adaptive equipment. |
| Connectors and modules | Send rear-housing, plug, pin and control-module photos. |
| Market | Confirm left- or right-hand-drive beam pattern and local lighting rules. |
| Functions | Low beam, high beam, DRL, turn signal, side marker and dashboard monitoring. |
Why “2007+” needs additional confirmation
The G-Class remained in production through multiple electrical, lighting and body revisions. Vehicles that look similar externally can use different plugs, mounting details, modules and control logic. Later G-Class generations should not be assumed compatible with a W463 product simply because the year is newer than 2007.
Before ordering, send the VIN, production date, full front photo, side photo, close-up of each original headlight and clear photos of rear connectors and modules. Ask the supplier to confirm compatibility in writing.
Will the upgrade be plug-and-play?
It may be close to plug-and-play on a matching configuration, but this cannot be assumed for every W463. A change from halogen or xenon to LED can require adapters, different modules or coding. Dashboard bulb monitoring, DRL behavior and adaptive-lighting functions are common variables.
Does coding need to be done?
Coding may be required. The need depends on the original light source, control modules and supported functions. Scan the vehicle before disassembly, record existing faults, then scan again after installation. Confirm that lighting and leveling faults do not return.
What should be included in the package?
Ask for a written packing list confirming whether the order contains a left and right headlight pair, LED drivers, ballasts, control modules, wiring adapters, brackets and instructions. Do not assume that modules shown in a product photo are included.
Installation process
- Record the original lighting functions and scan for existing fault codes.
- Disconnect power according to the vehicle service procedure.
- Compare mounting points, connectors and rear clearance before permanent installation.
- Connect and test both assemblies before final trim reassembly.
- Verify low beam, high beam, DRL, turn signals and dashboard warning status.
- Complete any required coding or module setup.
- Perform professional beam aiming.
Frequently asked questions
Will this fit my Mercedes G-Class?
It is intended for selected 2007+ W463 applications. Fitment still depends on chassis version, production date, original equipment, connectors and beam pattern. VIN and photos are required for final confirmation.
Which year models are compatible?
The product is listed as 2007+, but that does not mean every later G-Class is compatible. Confirm the exact W463 configuration and build date.
Is coding required?
Possibly, especially when changing lighting technology or when the vehicle uses bulb monitoring, auto leveling or adaptive functions.
What modules are included?
Package contents vary. Confirm drivers, ballasts, control modules and wiring adapters in writing before payment.
How difficult is installation?
Advanced. Electrical verification, possible coding, diagnostic scanning and beam aiming make professional installation the recommended approach.
Fitment note: A visual match and a broad year range are not final compatibility evidence. Use VIN, production date and connector photos.
