Compatibility summary: the Mercedes E-Class W213 Maybach-style body kit is listed for 2016-2023 W213 vehicles. The product description identifies a grille with front and rear bumper modification components, but exact fitment depends on the donor car’s production date, facelift phase, trim and driver-assistance equipment.
W213 Maybach-style body kit fitment table
| Fitment factor | Listed application | Required verification |
|---|---|---|
| Platform | Mercedes-Benz E-Class W213 | Confirm chassis from VIN. |
| Years | 2016-2023 | Use production date as well as registration year. |
| Exterior phase | Early or facelift W213 | Send full front and rear photos. |
| Equipment | PDC, camera and radar where fitted | Match all openings, holders and calibration needs. |
| Rear configuration | Original bumper, diffuser and exhaust layout | Confirm outlets and adjoining trim. |
W213 sedan and other E-Class bodies
W213 generally identifies the sedan platform. S213 wagon, C238 coupe and A238 cabriolet use different body configurations and should not be assumed compatible. The supplier should confirm the exact chassis, body and market version before the order is finalized.
Pre-facelift and facelift checks
The W213 received major exterior changes during its production cycle. Grille, bumper, lamp, hood and electronic interfaces can differ. A 2016 vehicle and a 2023 vehicle should not be treated as identical simply because both appear inside the advertised range. Photographs and production information must determine the quoted configuration.
Confirmed product scope
The product description identifies a Maybach-inspired grille and front and rear bumper modification kit. It does not publicly itemize every insert, bracket, trim, diffuser, sensor holder, exhaust finisher or fastener. A written packing list should define all included and reused pieces.
Pre-order checklist
- Provide the full VIN and production month.
- Confirm W213 sedan body and early or facelift exterior.
- Send front, rear and side photos.
- Document parking sensors, front camera and radar equipment.
- Photograph grille, lamp edges, bumper corners and rear exhaust outlets.
- Disclose prior collision repair or non-original panels.
- Approve the packing list and calibration responsibility in writing.
Installation and electronics
Inspect the shipment and dry-fit the entire package before paint. The body shop should check hood, fender, lamp, grille and bumper gaps; sensor holders; radar location; undertray connections; rear diffuser and exhaust relationships; and all visible trim interfaces.
After final assembly, test parking sensors, cameras and driver-assistance systems. If radar or camera equipment has moved, follow Mercedes-compatible diagnostic and calibration procedures. The conversion changes exterior appearance only and does not create Mercedes-Maybach mechanical or legal identity.
Related W213 guides and products
Compare this luxury-oriented design with the W213 E63 AMG performance-style kit. Review the W213 LED headlight compatibility guide and the W212 vs W207 vs W213 headlight buyer guide. Browse more options in the Mercedes E-Class body kit category.
Frequently asked questions
Will this Maybach-style body kit fit my Mercedes E-Class W213?
The product is listed for 2016-2023 Mercedes-Benz E-Class W213 vehicles. Fitment must still be confirmed using the VIN, production date, sedan body, pre-facelift or facelift exterior, trim, sensor layout, camera, radar and exhaust configuration.
Which W213 model years are compatible?
The listed range is 2016-2023. Registration and production dates can differ, and the W213 changed during its model cycle, so early-versus-facelift fitment should be verified with photos and VIN data.
Does the W213 Maybach-style kit require coding?
The grille and exterior panels normally do not require coding. If parking sensors, radar, cameras or other driver-assistance components are disconnected or relocated, diagnosis, fault-code clearing, functional checks or calibration may be required.
What parts are included in the W213 Maybach-style kit?
The product description identifies a grille plus front and rear bumper modification kit. Buyers should obtain a written packing list confirming every grille insert, trim, bracket, sensor holder, diffuser, exhaust finisher and fastener.
How difficult is W213 body kit installation?
Installation is professional body-shop work. The complete package should be dry-fitted before paint, with bumper, grille, lamp, hood, fender, sensor, radar, undertray and exhaust alignment checked before final assembly.
