Quick answer: Tangma Craftsman lists two styling options for the 2006–2012 Lexus IS GSE20 and a separate product for the 2013–2016 XE30. GSE20 and XE30 assemblies are not interchangeable. Confirm chassis, VIN, production date, original lighting, connectors, modules and beam pattern before ordering.
Lexus IS headlight options compared
| Product | Published application | Design emphasis | Listed price when checked |
|---|---|---|---|
| Lexus IS LED Headlight 2006+ | GSE20, 2006–2012 description | Triple-eye DRL | € 799 |
| Lexus IS Sequential LED Headlight 2006+ | GSE20, 2006–2012 description | Sequential DRL lens | € 799 |
| Lexus IS LED Headlight 2013+ | XE30, 2013–2016 description | Triple-lens DRL | € 799 |
Prices and package contents may change. Confirm the current quotation before payment.
GSE20 versus XE30
The first decision is chassis compatibility. GSE20 and XE30 use different body shapes, mounting geometry and lighting systems. A 2006+ product must not be interpreted as fitting every later Lexus IS. Use the VIN and production date to identify the correct platform.
Choosing between the two GSE20 styles
For a verified 2006–2012 GSE20, the two listed options share the same published price but emphasize different styling: triple-eye DRL versus sequential DRL. Choose only after verifying that mounting points, connectors and supported functions match the exact vehicle. Confirm whether sequential lighting behavior complies with local regulations.
XE30 2013–2016 option
The XE30 listing is a separate product with a triple-lens DRL description. Later XE30 facelifts should not be assumed compatible simply because the title begins at 2013. Build-specific confirmation remains necessary.
Compatibility checklist
- Chassis: GSE20 or XE30
- VIN and production date
- Trim and destination market
- Original halogen, xenon, LED or adaptive equipment
- Rear housing, connector and module photos
- LHD or RHD beam pattern
- Required DRL, turn-signal, leveling and adaptive functions
- Written package list
Will installation be plug-and-play?
Vehicle-specific assemblies may reduce fabrication, but electrical compatibility must still be checked. Halogen-to-LED or xenon-to-LED conversions can require drivers, adapters, resistors, modules or configuration changes.
Does coding need to be done?
Coding may be required. The need depends on the original lighting and monitoring system. Scan the vehicle before and after installation, then verify that bulb, leveling and adaptive-lighting warnings do not return.
What should be included?
Confirm a left/right pair and ask whether LED drivers, ballasts, control modules, wiring adapters, brackets and instructions are included. If original modules must be transferred, confirm compatible part numbers.
Installation difficulty
This is an intermediate-to-advanced retrofit. Test low beam, high beam, DRL, turn signals, side markers and dashboard warning status before final bumper or trim reassembly. Professional beam aiming is required.
Frequently asked questions
Will GSE20 headlights fit an XE30?
No. They are separate chassis applications with different housings and mounting geometry.
Which model years are compatible?
The GSE20 products describe 2006–2012, while the XE30 product describes 2013–2016. VIN and production date still require verification.
Is coding required?
Possibly, especially when changing lighting technology or retaining leveling and adaptive functions.
What modules are included?
Package contents vary. Confirm drivers, ballasts, control modules and adapters in writing.
How difficult is installation?
Intermediate to advanced. Professional electrical testing and beam aiming are recommended.
Fitment note: Choose by chassis first and styling second.
