Quick answer: The 2012+ Chevrolet Captiva LED Headlights is a vehicle-specific DRL sequential-lens upgrade listed for 2012+ vehicles. Confirm VIN, production date, original headlight type, connectors, modules and LHD/RHD beam pattern before ordering.
Product snapshot
| Vehicle | Published starting year | Design | Price when checked |
|---|---|---|---|
| Chevrolet Captiva | 2012+ | DRL sequential-lens | € 788 sale / € 888 regular |
Prices and contents may change. Confirm the current quotation and packing list before payment.
What the published year means
A starting year is useful for screening, but it does not prove compatibility with every Chevrolet Captiva. Production dates, facelifts, regional specifications and original halogen, xenon or LED equipment can change connectors, mounting points and control logic.
Send the supplier the VIN, production date, full front photos, rear housing photos and close-ups of connectors and modules. Registration year alone is not enough in markets where vehicles may be registered after production.
Design and function
The listed assembly uses a DRL sequential-lens description. Styling terms describe the visible design; they do not automatically confirm factory adaptive, camera-controlled or matrix functionality. Ask for a written list covering DRL, low beam, high beam, turn signal, side marker, leveling and dashboard monitoring.
Compatibility checklist
- Exact Chevrolet Captiva generation and production date
- VIN and market specification
- Original halogen, xenon or LED lighting
- Front, rear housing, mounting-tab and connector photos
- LHD or RHD beam pattern
- Required DRL and turn-signal behavior
- Leveling, adaptive and bulb-monitoring functions
- Written list of included modules and adapters
Price and total installed cost
The product was listed at € 888, with a € 788 sale price when checked. Budget beyond the product price for shipping, duties, professional installation, possible coding and beam aiming. The lowest purchase price is not the lowest total cost if important modules or adapters are excluded.
Installation process
- Record original lighting functions and scan existing faults.
- Compare housings, brackets, connectors and modules before removing protective film.
- Install required adapters, drivers or transferred modules.
- Test DRL, low beam, high beam, turn signals and dashboard warnings before final bumper reassembly.
- Check rear covers, seals and moisture protection.
- Complete required coding or electrical adaptation.
- Perform professional beam aiming.
Common problems to test
Check for flicker, one-sided failure, bulb warnings, incorrect DRL or turn-signal behavior, condensation and beam misalignment. Diagnose connectors, grounds, rear covers, moisture, modules and coding settings before replacing components.
Frequently asked questions
Will this fit my Chevrolet Captiva?
Fitment depends on the exact vehicle generation, production date, original lighting, connector layout, mounting points, beam pattern and electronic functions. Confirm with VIN and clear photos before ordering.
Which year models are compatible?
The product listing starts at 2012+. This is a starting point, not universal confirmation for every trim, facelift or market configuration.
Is coding required?
Coding or electrical adaptation may be required when the original lighting technology, bulb monitoring, leveling or adaptive functions differ. Test all functions and scan for faults before final reassembly.
What modules are included?
Package contents can vary. Confirm whether the order includes a left/right pair, LED drivers, ballasts, control modules, adapters, brackets and instructions, and whether original modules must be transferred.
How difficult is installation?
Installation is intermediate to advanced. Professional connector checks, functional testing, waterproofing inspection and final beam aiming are recommended.
Fitment note: Final compatibility must be confirmed from the exact vehicle configuration. Do not order from the model name and year alone.
